Home > Product > Serial Module
WIZ110SR
|
Feature |
|
- All-made Sireal to Ethernet module
> Simple and quick network implementation > Available of firmware customization for various serial devices - High stability & reliability by using W5100 - Easy & Powerful Configuration program - 10/100Mbps Ethernet Interface, Max 230Kbps Serial Interface - RoHS compliant
|
Specification |
|
Architecture |
TCP / IP |
W5100 |
|
PHY |
Included in W5100 |
| Serial |
RS-232 |
| MCU |
GC89L591A0-MQ44I(fast 80C52 compatible) - 62K Bytes in-system programmable(ISP) flash |
|
Network |
Interface |
10/100 Mbps auto sensing RJ-45 Connector |
|
Protocol |
TCP, UDP, IP, ARP, ICMP, MAC, PPPoE |
| Serial |
Interface |
DB9 Connector |
| Signals |
TXD, RXD, RTS, CTS, GND |
| Parameters |
Parity None, Even, Odd Data bits 7,8 Flow Control RTS/CTS, XON/XOFF |
| Speed |
Up to 230Kbps |
| Dimensions |
75mm X 45mm (PCB width X length) |
|
Input Voltage |
DC 5V |
|
Power Consumption |
DC 5V, Under 220mA |
|
Temperature |
0° C ~ 70° C (Operating), -40° C ~ 85° C (Storage) |
|
Humidity |
10 ~ 90% |
|
|
Comparison among WIZnet Serial-to-Ethernet Modules
|
|
| |
WIZ100SR |
WIZ105SR |
WIZ110SR |
WIZ120SR |
Hardware
|
UTP Pin Header |
RJ45 Connector |
RJ45 Connector |
UTP Pin Header |
| TTL Pin Header |
DB9 connector |
TTL Pin Header (2 Serials) |
Common Key Features
|
- W5100 Embedded - 10/100Mbps Ethernet Interface - Max. 230Kbps Serial Interface - Easy & Powerful Configuration Program - Support TCP/UDP/IP/ARP/ICMP/MAC/Static/DHCP/PPPoE/DNS/Serial Command |
|
| | |
|
 |
WIZ1x0SR F/W ver4.31 |
 |
WIZnet |
 |
2013-01-30 |
 |
4993 |
This is the latest firmware for WIZ1x0SR. You can use the Configuration Tool to update your device.
Ver4.31 - Removed the DNS IP filtering. - Applied the stable codes.
Ver4.1
- Add MAC, IP address Gateway IP address and Subnet IP address output when Debug message enabled
- Sending 1 byte dumy data to gateway during booting in order to update ARP table
- Serial command mode of H/W trigger revised.
- Initializating configuration socket again after DNS query
- Initializating configuration socket again after DHCP routine |
 |
rom0431_WIZ1x0SR.bin (Down : 1905)
http://www.wiznet.co.kr/UpLoad_Files/ReferenceFiles/rom0431_WIZ1x0SR.bin
|