홈 > 구매처 > 파트너사

Partner

(www.arduino.cc)

Arduino Ethernet Shield

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP
-Page View for Arduino Ethernet Shield
-Page View for Arduino Ethernet Board

(http://www.parallax.com)

Spinneret Web Server

The Spinneret Web Server is a low-power, low-cost embedded web server development platform. As an open-source hardware platform, the Spinneret Web Server can be used as a stand alone web server, built into larger projects, or used as a reference design.
-Page View for Parallax Spinneret Web Server

(http://www.leafalbs.com)

Wizzin through the Ether…net : Maple + WIZ820io

Leaflab builds 32-bit microcontroller development boards. With 72MHz clock speed, up to 512KB Flash, and up to 64KB RAM, their open –source devices can take on though computational tasks. WIZnet’s WIZ820io module lets their Maple board to have Ethernet connection. With one SPI and three digital IOs, you have the whole Internet in your hands.
-Page View for Wizzin through the Ethernet
-Page View for WizEthernet Wiki

Ben’s Hobby Corner(http://benshobbycorner.nl)

WizFi210 Arduino Mega Shield

A working Arduino Mega Wizfi210 shield. Two buttons on the GPIO, three LEDs, power regulator with a shutdown, connected to two soft serial ports on the Arduino.
-Page view for Wizfi210 Arduino Mega Shield

(www.freetronics.com)

EtherTen Hardware

The EtherTen is a 100% Arduino compatible board that can talk to the world. Do Twitter updates automatically, serve web pages, connect to web services, display sensor data online, and control devices using a web browser. The Freetronics EtherTen uses the same ATmega328P as the Duemilanove and the same Wiznet W5100 chip used by the official Arduino Ethernet Shield, so it's 100% compatible with the Ethernet library and sketches.
-Page View for Freetronix EtherTen Hardware

(www.dfrobot.com)

Ethernet Shield

The Arduino Ethernet Shield gives you an easy way to get your Arduino Online. It uses Arduino official Wzinet W5100 ethernet chip (not cheap ENC28J60) And it is directly supported by Arduino official Ethernet Library
-Page View for DF Robot Ethernet Shield for Arduino


WiFi Shield

The only 802.11 b/g WiFi shield in the world. This board only uses Tx/RX which transfers the UART signal to TCP/IP. And it is great to make the arduino project wireless. With the enhancment from 802.11g, the maximum range is about 100m indoors and 300 meters outdoors.
-Page View for DF Robot WiFi Shield for Arduino

WiFi Shield V2.1 for Arduino

The shield uses WizFi210 which is a low power-consuming WiFi module which is applied with power management technology. When WiFi module needs to be on but not work, it can be set to Standby mode, a low power mode, and the module just needs to be woken up when it has to work.
-Page View for WiFi Shield V2.1 For Arduino

(http://seeedstudio.com)

WIZnet Ethernet Shield – W5100

This is a Ethernet shield based on the Wiznet W5100 ethernet chip, compatible with Arduino Ethernet Shield,added support to Arduino Mega
-Page View for Seed Studio Ethernet Shield

(http://www.gravitech.us)

Ethernet with Micro SD for Arduino Nano

The add-on module allows you to connect the Arduino Nano to the Internet. It is base on the WIZnet W5100 Ethernet chip which provides a network stack capable of both TCP and UDP.
-Page View for Gravitech’s Ethernet with Micro SD for Arduino Nano

QUICK MENU

 

Environ
ment

 

Online Store

 

WIZwiki

 

Distributor

 

Q & A